真空斷路器手車自動控制器的設計 

王國華，劉斌 
(現代重工(中國)電氣有限公司，江蘇 揚中 212212) 
 

摘 要： 針對國家電網對真空斷路器手車需自動控制的要求，采用MC68HC908GR8 單片機實現主控與通信功能，雙繼電器實現電機控制，霍爾電流互感器實現對電機電流的采樣，設計了一種具有對手車自動投切、電機正反轉控制、電機堵轉保護、遠程狀態顯示等特點的智能控制器。通過各種配柜功能測試、電磁兼容試驗及現場投入運行，結果表明該控制器能精確測量，投切穩定、可靠。
關鍵詞： 真空斷路器；手車；自動控制器；霍爾電流互感器；繼電器
中圖分類號：TM591+.2 文獻標識碼：A 文章編號：1007-3175(2014)09-0017-04

Design of Automatic Control Unit for Vacuum Circuit Breaker Trolly 

WANG Guo-hua, LIU Bin 
（HYUNDAI Heavy Industries (China) Electric Co., Ltd, Yangzhong 212212, China） 
 

Abstract: In view of the requirement of automatic control for vacuum circuit breaker trolly from State Grid, an intelligent device with many features such as automatic switching for the trolly, controlling the forward and reverse rotation, motor locked-rotor protection, remote status display was designed, by using MC68HC908GR8 micro-controller as main control and communication module, two relays as motor control module, and Hall current transformer as sampling motor current. The experimental results show that the controller can do measurement accurately, switch stably and reliably by various function tests with switchgear, EMC experiments, and on-site operation.
        Key words: vacuum circuit breaker; trolly; automatic control unit; Hall current transformer; relay

參考文獻
[1] 劉慧銀，程建平，龔光華，等.Motorola微控制器MC68HC08原理及其嵌入式應用[M].北京：清華大學出版社，2001.
[2] 王成多，楊利峰，程雪婷.智能電器中的電磁兼容及其對策[C]//第一屆電器裝備及其智能化學術會議，2007：27-32.
[3] 劉大欽.10 kV中置式高壓開關柜匹配使用的手車結構的改進研究[J].機電信息，2012(15)：95-97.
[4] 錢家驪，袁大陸，楊麗華，等.高壓開關柜——結構、計算、運行、發展[M].北京：中國電力出版社，2007.