基于CIM的異構電力仿真軟件互連接口技術研究
周博曦1，何磊2, 孟昭勇3
(1 國家電網技術學院，山東 濟南 250001；2 國網河北省電力公司電力科學研究院，
河北 石家莊 050021；3 山東大學 電氣工程學院，山東 濟南 250061)
摘 要： 研究以CIM/XML 作為載體，實現異構電力仿真軟件接口交互技術，提出了一種等值電網模型，通過對模型中類擴展相應屬性保存CIM 模型元件對象，克服了經拓?fù)浞治龊?jiǎn)化后電網模型難以還原，以及CIM 模型無法直接獲得仿真軟件所需必要參數等缺點；提供了CIM/XML 文檔到電力仿真軟件模型文件的接口映射方法，以及使用等值網絡模型實現仿真數據到CIM 模型中相應對象的返回。結果表明：以CIM/XML 為載體的電力仿真軟件接口轉換技術對實現異構仿真軟件之間信息交互具有實用價值。
關鍵詞： CIM 模型；電力仿真軟件；接口交互技術
中圖分類號：TM711 文獻標識碼：A 文章編號：1007-3175(2014)09-0021-04
Study on Mutual Connection Interface Technology of Isomerized Electric Power Simulation Software Based on Common Information Model
ZHOU Bo-xi1, HE Lei2, MENG Zhao-yong3
（1 State Grid of China Technology College, Jinan 250001, China; 2 Hebei Electric Power Company of Electric Power Research Institute,Shijiazhuang 050021, China; 3 School of Electrical Engineering, Shandong University, Jinan 250061, China）
Abstract: The common information model (CIM)/extensive markup language (XML) was taken as the carrier to realize the mutual connection interface technology of isomerized electric power simulation software. This paper raised a kind of equal value electric power network model. The corresponding properties of classes in the model were expanded to save the CIM model element objectives, which overcame the shortcomings, such that the electric power network model restored difficultly after topologic analysis was simplified and that the electric power network model couldn’t directly obtain simulation software necessary parameters. The interface reflection was provided from CIM/XML files to electric power simulation software documents. The equal value network model was used to realize simulation data return of the corresponding objectives in CIM model. The result shows that with CIM/XML as the carrier, the interface transfer technology of electric power simulation software was provided with practical values to realize information exchange between isomerized simulation softwares.
Key words: common information model; electric power simulation software; mutual connection interface technology
參考文獻
[1] 劉念，張建華，熊浩，等.面向電力仿真系統異構性的CIM擴展方法[J].電網技術，2008，32(21)：58-62.
[2] 周博曦，孟昭勇，王志臣，等.基于CIM的變電站與配電饋線一次接線圖自動繪制算法[J].電力系統自動化，2012，36(11)：77-81.
[3] McMorran Alan W, Ault Granham W, Foote Colin E T. Translating CIM XML Power System Data to a Proprietary Format for System Simulation[J].IEEE Transactions on Power System, 2004, 19(1)：229-235.
[4] 周博曦.基于IEC 61968標準的配電網潮流計算系統開發[D].濟南：山東大學，2012.
[5] IEC 61970：2005 Energy Management System Application Program Interface (EMS-API) Part 301：Common Information Model(CIM)[S].
[6] IEC 61968-3：2004 Application Integration at Electric Utilities-System Interfaces for Distribution Management Part 4：Interfaces for Network Operations[S].
