Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

新型塔架的類型及發展趨勢

來源:電工電氣發布時間:2016-03-10 16:10 瀏覽次數:9

新型塔架的類型及發展趨勢 

曹成帥,李春蘭,汪澤,王長云 
新疆農業大學 機械交通學院,新疆 烏魯木齊 830052 
 

摘 要:風力發電機組的不斷大型化,需要對各種類型的塔架方案不斷優化以滿足大型化機組的需求。闡述了風機塔架的類型及新型塔架的國內外研究現狀,分析了新型塔架所面臨的一系列問題,指出新型分片式塔架是未來新型塔架的發展趨勢,而減小新型分片式塔架片體縱向與橫向連接處的強度載荷與疲勞載荷,是需要解決的關鍵問題。
關鍵詞:風機大型化;塔架;優化;類型
中圖分類號:TM75 文獻標識碼:A 文章編號:1007-3175(2016)02-0001-04


Types and Development Trend of New Tower 

CAO Cheng-shuai, LI Chun-lan, WANG Ze, WANG Chang-yun 
College of Mechanical Engineering and Traffic, Xinjiang Agricultural University, Urumqi 830052, China 
 

Abstract: With the upsizing of the wind driven generator, it’s necessary for various type of tower scheme to optimize continuously, so as to meet the requirement. This paper expounded that the research status of draught fan tower types and new type tower at home and abroad and analyzed a series of problems for new type tower. It is pointed that the new type burst tower is the development tendency of future new type tower and the key problem is to reduce the strength and fatigue loads between lengthways join and crosswise join of new type burst tower sheet-body.
Key words: large-scale draught fan; tower; optimization; type


參考文獻
[1] 羅天雨.新型模塊化風力發電機塔架設計[EB/OL].(2012-07-20)[2015-12-16].http://windpower.ofweek.com/2012-07/ART-330005-11000-28632659.html.
[2] 張志英,趙萍,李銀鳳,等.風能與風力發電技術[M].北京:化學工業出版社,2010.
[3] 廖明夫,Gasch R,Twele J.風力發電技術[M].西安:西北工業大學出版社,2009.
[4] Singh A N.Concrete construction for wind energy towers[J].Indian Concrete Journal,2007(8):42-44.
[5] 舒興平.高等鋼結構分析與設計[M].北京:科學出版社,2006.
[6] 王笑鋒,何敏娟.錐形單管塔的非線性靜力分析[J].結構工程師,2000(4):21-24.
[7] 顧富斌.風電機組用鋼-混凝土組合塔架研究[D].烏魯木齊:新疆農業大學,2009.
[8] 李志梅,趙東標.風電技術現狀及發展趨勢[J].電氣技術,2007(6):48-50.
[9] 沈祖炎.鋼結構學[M].北京:中國建筑工業出版社,2005.
[10] 張慶華,顧明,黃鵬.格構式塔架風力特性試驗研究[J].振動與沖擊,2009,28(2):1-4.
[11] 韋青.兆瓦級木制風電塔筒-德國木塔公司的創新[EB/OL].(2014-10-30)[2015-12-16].http://news.bjx.com.cn/html/20141030/559249.shtml.
[12] Limam Marouene.FE Modelling of Friction Connections in Tubular Tower for Wind Turbines[M].Lulea:Lulea Tekniska University,2011.
[13] Heistermann Christine.Behaviour of Pretensioned Bolts in Friction Connections:Towards the Use of Higher Strength Steels in Wind Towers[M].Lulea:Lulea Tekniska University, 2012.
[14] Husson W.Friction Connections with Slotted Holes for Wind Towers[M].Lulea:Lulea Tekniska University,2008.
[15] Heistermann C, Husson W, Veljkovic M.Flange connection vs.friction connection in towers for wind turbines[C]//Proceedings of Nordic Steel and Construction Conference,2009.
[16] Engstrom S, Lyrner T, Hassanzadeh M, et al. Tall Towers for Large Wind Turbines[R].Report from Vindforsk Project V-342 Hogatorn for Vindkraftverk,2010.
[17] Van der Tempel TUD J, lutje Schipholt TUD B. The slip-joint connection-alternative connection between pile and tower[EB/OL]. (2003-1-17)[2009-08-08].http://www.ecn.nl/does/dower/10093-000.pdf.
[18] 哈里達蘇 B,方飆,鄭大年.模塊化塔架及其組裝方法:中國,102606416[P].2012-07-25.
[19] 詹斯·湯姆森.風力發電機機塔架和用于建造風力發電機塔架的方法:中國,101328864[P].2008-12-24.
[20] 劉愷.風力發電機新型反向平衡法蘭研究與試驗[D].上海:同濟大學,2008.
[21] 馬人樂,黃東平,呂兆華.反相平衡法蘭有限元分析[J].特種結構,2009,26(1):21-25.