AP1000核電廠低壓電力電纜截面的選擇方法 

鄭海龍 
山東核電有限公司，山東 煙臺 265116 
 

摘 要：合理地選擇電纜截面可提高配電系統安全性，減少事故隱患。結合AP1000核電工程實踐，從電纜載流量、抗短路能力、電壓損失、投資和運行的經濟性等角度介紹了AP1000核電廠電力電纜截面選擇的原則及有效方法，通過對載流量、敷設環境、電壓降等因素計算分析后，得出不同敷設環境中針對不同負荷類型的電力電纜截面選擇表，為后續核電工程設計與完善提供了借鑒。
關鍵詞：核電廠；電力電纜；截面；電纜敷設
中圖分類號：TM247 文獻標識碼：B 文章編號：1007-3175(2016)02-0033-04

Selection Method of Low Voltage Power Cable Section in AP1000 Nuclear Power Plant 

ZHENG Hai-long 
Shandong Nuclear Power Company Ltd, Yantai 265116, China 
 

Abstract: The reasonably selection of power cable section could raise the security of power distribution system and reduce accidents potential. Combining with AP1000 nuclear power engineering practice, introduction was made to the principle and effective way of power cable section selection of AP1000 nuclear power plant from the corner of power cable carrying capacity, anti-short-circuit capacity, voltage loss, economy of investment and operation, and so on. After the analysis and calculation of carrying capacity, laying environment and voltage drop etc factors, this paper obtained power cable section option lists of different load types for different laying environment, which provides references for the power cable sizing design in other nuclear power plant.
Key words: nuclear power plant; power cable; section; cable laying

參考文獻
[1] 張釗，胡大偉，古德強.電線電纜的載流量計算和敷設方式選擇[J].現代建筑電氣，2013(S1)：148-151.
[2] 郭云霞.電力電纜截面選擇初探[J].上海電力學院學報，2007，23(2)：123-126.